ArCADiasoft EuroStal 3D

EuroStal 3D

A dimensioning module for basic steel elements according to the standard: PN-EN 1993-1-1 Eurocode 3: June 2006. The program verifies the load carrying capacity for the following bar cross-section types:

rolled I-sections,

halves of rolled I-sections,

rolled T-sections,

rolled C-sections,

rolled equal and unequal leg angles,

rolled rectangular, square and circular pipes,

any welded mono-symmetric I-sections,

any welded mono-symmetric T-sections,

welded box sections (mono-symmetric),

cold-formed rectangular, square and circular pipes.

According to the rules contained in the PN-EN 1993-1-1 standard, the dimensioning program verifies the load-carrying capacity of element cross-sections, taking into account the local stability of a cross-section only and allowing for the global stability of an element.

As part of the verification of the load-bearing capacity of a cross-section, the following is specified:

the tensile load-bearing capacity,

the compression load-bearing capacity,

the bending load-bearing capacity,

the shearing load-bearing capacity,

the bending and shearing load-bearing capacity,

the bending load-bearing capacity with  longitudinal force,

the bending and shearing load-bearing capacity with longitudinal force.

When the global stability of an element is verified, the following is defined:

the buckling load-bearing capacity for compressed elements,

the lateral buckling load-bearing capacity for bent elements,

the interactive load-bearing capacity of bent and compressed elements.